About Your Artglass

Artglass is based on an optical thin layer system, which works on the interference effect. Contaminations on it, such as fingerprints, disturb its optical benefit and appearance much more than that of regular glass. In the event of contamination, we recommend the following cleaning method:

What to use

• Synthetic microfiber wipe without any chemical softener
• Household glass cleaner without ammonia and low content of tenside in a spray bottle
• Clean, dry hands; we recommend powder-free, one-way gloves

How to clean your Artglass

• Moisten the cleaning wipe by lightly spraying with the glass cleaner.
• Begin cleaning your Artglass by wiping from the center of the glass to the edges.
• Using a dry section of the cleaning wipe, polish the remaining streaks or stains with a rotating motion.
• Any contamination on Artglass (i.e. saliva spots, fingerprints, etc.) should be removed from the glass surface immediately.

Special notes

• Do not wash the cleaning wipe with a chemical softener.
• Do not scratch the glass surface with metallic or ceramic tools (steel wool, cutter, etc.)
• Do not polish the glass using abrasive materials (glass ceramic cleaner, etc.)
• Only use glass cleaner that is pH-neutral (pH7) (i.e. no lyes, no acids)
• Do not use regular kitchen paper towels, as they might produce scratches on the coating.
• Do not apply substances that "promise" to improve surface quality i.e. silicon spray.

The result

• Long term satisfaction with your high-quality Artglass

Please consult GroGlass if the suggested cleaning methods do not work. GroGlass cannot accept responsibility if the provided cleaning instructions are not observed.